| Product Name： | 3PH Off Grid Hybird Solar Inverter TSG 10-40KW-C |
◆ DSP Control Three phase Off Grid Hybrid solar inverter TSG 10-40KW-C
◆ 3 in 1 design ,Solar Inverter + MPPT Controller+ Power Charger (Option)
◆ Support mains/generator input, with mains Bypass output
◆ Sine wave isolated output,support 100% unbalanced load
◆ Double LCD display For PV , Battery , Inverter running display and setup
◆ Grid Power or solar power priority selectable by user
◆ Battery Battery High Voltage and Low Voltage disconnection programmable
◆ Plug and play design,with PV input,AC input,AC output and battery input Breakers
◆ Full protections and Alarm for over load short circuit and so on
◆ Power Charger is Option |
 
TSG 10K-40KW-C |
|
Model: |
TSG-10KW-C |
TSG-15KW-C |
TSG-20KW-C |
TSG-30KW-C |
TSG-40KW-C |
|
Rated power |
10KW |
15KW |
20KW |
30KW |
40KW |
|
Inverter |
Input voltage |
Three phase, 3PH+N+G 304-456VDC or 3PH+G,150V-228V |
|
Input frequency |
45-65Hz |
|
Output voltage |
3PH+N+G,380V±1% or 3PH+G=220V±1% |
|
Output frequency |
50/60Hz |
|
Output waveform |
Pure sine wave |
|
Total harmonic distortion |
linear load＜3% Nonlinear load＜5% |
|
Efficiency |
≥90%（load100%） |
|
Overload capacity |
120% 20s； ＞150%，100ms |
|
Transfer time |
Automatic, 1-3S or within 10MS for choice |
|
Protection function |
Overload, short circuit, Over charge, low battery protection |
|
Working Mode |
Grid Power or solar power priority selectable by user |
|
ON/OFF |
By Battery or Mains Breaker |
|
Battery Vdc |
Rated voltage |
192V /240V |
384V DC |
|
over discharge protection |
172V/215V |
345V DC |
|
Power Charger (Option) |
6A |
6A |
6A |
3A |
3A |
|
MPPT Controller |
Rated current |
50A |
80A |
100A |
80A |
100A |
|
Rated voltage VDC |
192V /240V (384 option ) |
384V DC |
|
Array Number of PV input |
1 |
2 |
2 |
2 |
2 |
|
Solar input voltage Range |
260-420V@192V / 320-420V @240V |
665-820V |
|
over Voltage protection |
425VDC@192/240VDC. |
825VDC |
825VDC |
|
Over Voltage Recovery |
420VDC@192/240VDC, |
820VDC |
820VDC |
|
Low Voltage Protection |
240VDC@192V, 300V@240V |
480VDC |
480VDC |
|
Control accuracy |
±0.1 |
|
Display accuracy |
±0.1 |
|
Efficiency |
>95% |
|
Controller Display |
LCD |
PV VDC/KW/KWH working status; Charge VDC Amp working status , Output Amp working status , Setup For Bat LVD,Fault |
|
LED |
PV Load1-4 Working status, |
|
Inverter display |
LCD |
IP/OP VAC HZ W , BAT VDC Amp WH , Charge Amp . setup for Grid Power or solar power priority, |
|
LED |
Line, Power Charge,interter working status ; Fault |
|
Other |
Ambient temperature for operation |
0-40ºC |
|
Relative humidity for operation/storage |
20-90% (No condensation, maximum) |
|
Product size mm |
638*566*1295 |
|
Product Weight KG |
180 |
210 |
240 |
320 |
420 |
|
CTN Size mm |
760*690*1540 |
|
Schematic Diagram |
System Connection Drawing |
|
Solar Controller Instructions
|
Inverter & Power Charger Display
|
|
|
|
